[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Question on Programming DCS PC5010

Subject: Re: Question on Programming DCS PC5010
From: "Jim Rojas" <jrojas@xxxxxxxxxxxx>
Date: Thu, 17 Mar 2005 00:20:29 GMT
Newsgroups: alt.security.alarms
References: <5W3_d.16025$yp.4215@xxxxxxxxxxxxxxxxxxxxxxxxxx>

Code 40 is the partition 1 master code.

Next to the user code you will see a few check boxes. Make sure partition
one is selected.

Jim Rojas


"TxNative" <TxNative@xxxxxxxxxxx> wrote in message
news:5W3_d.16025$yp.4215@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Programming a DCS PC5010 using DLS. Getting an error message "Access code
> #40 has been programmed but is not assigned to any partition".
> The only codes currently programmed are the Installer Code, Master Code,
> and Downloading Access Code.
> There are no User Access codes programmed.
> What code is Access Code #40 ?
> Any ideas on why I am getting the error?
>
> Thanks
>

Follow-Ups:
- Re: Question on Programming DCS PC5010
  - From: alarman
- Re: Question on Programming DCS PC5010
  - From: TxNative

References:
- Question on Programming DCS PC5010
  - From: TxNative

Prev by Message: Re: 802.11
Next by Message: Re: Nasty Sunday
Previous by thread: Question on Programming DCS PC5010
Next by thread: Re: Question on Programming DCS PC5010
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home