Re: Ademco 6270 Lighting Control

["HoneywellTech" <seccon1@xxxxxxxxxxx>]

 Marc
has answered accurately,

There is a 50PEN version that does support the 6270 but it belongs to ADT

"Dave" <daves@xxxxxxxx> wrote in message
news:91723$42cdd4a3$943fdd6e$11795@xxxxxxxxxxxxxxx
> Does the 128BP support X10 output control though? That's what I'm trying
to
> do - use the 6270 to turn lights on and off via X10. I'm doung it now with
> my Vista 20P, But the family is not impressed with the choice of output1
or
> output2. They'd rather see "Porch Lights" and "Driveway Lights"
>
> Will the 50P do it? Looking at Compass, it seems to have the dame
> description and voice descriptor fields as the 128BP, but also has an X10
> option in addition to relays.
>
> Dave
>
>
>
> "HoneywellTech" <seccon1@xxxxxxxxxxx> wrote in message
> news:eplze.6341$x82.1648@xxxxxxxxxxx
> > Mark is Correct,
> >
> > If you want to use Output names then the control has to have a menu that
> > allows that options such as V128BP etc
> > "Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
> > news:5o2dnWx6pbBaLVDfRVn-tQ@xxxxxxxxxxxxxx
> >> If the panel supports naming the outputs then I would think the 6270
> >> would
> >> as well although I've not tested it on anything larger than a V-20P
> >>
> >> "Dave" <daves@xxxxxxxx> wrote in message
> >> news:d6391$42ccf5d3$943fdd6e$1756@xxxxxxxxxxxxxxx
> >> > Thanks Mark.
> >> >
> >> > I noticed when booting up, the 6270 says something like "Receiving
> > output
> >> > descriptions" after it goes through "receiving zone descriptions", so
I
> >> > thought maybe a Vista 50P or 128 or 250 might support it.
> >> >
> >> > Must be a "reserved for future expansion" kind of thing.
> >> >
> >> > Dave
> >> >
> >> > "Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
> >> > news:RN6dnQUOi99QJFHfRVn-qA@xxxxxxxxxxxxxx
> >> > >
> >> > > "Dave" <daves@xxxxxxxx> wrote in message
> >> > > news:29413$42cc8ada$943fdd6e$27226@xxxxxxxxxxxxxxx
> >> > >> I realize that the 6270 is no substitute for a lighting control
> > system,
> >> > > but
> >> > >> is it possible to name the lighting outputs dislayed on the 6270?
> >> > >>
> >> > >> I just installed my 6270, and upgraded from a Vista20P-R2.5 to a
> >> > >> Vista20P-R3. Do I need a different panel to name these outputs, or
> >> > >> is
> >> it
> >> > >> just not supported? The manual does not mention it at all.
> >> > >>
> >> > >> dave
> >> > >
> >> > > Can't name the outputs
> >> > >
> >> > >
> >> >
> >> >
> >>
> >>
> >
> >
>
>