Re: Ademco 6270 Lighting Control

["Mark Leuck" <m..leuck@xxxxxxxxxxx>]

If the panel supports naming the outputs then I would think the 6270 would
as well although I've not tested it on anything larger than a V-20P

"Dave" <daves@xxxxxxxx> wrote in message
news:d6391$42ccf5d3$943fdd6e$1756@xxxxxxxxxxxxxxx
> Thanks Mark.
>
> I noticed when booting up, the 6270 says something like "Receiving output
> descriptions" after it goes through "receiving zone descriptions", so I
> thought maybe a Vista 50P or 128 or 250 might support it.
>
> Must be a "reserved for future expansion" kind of thing.
>
> Dave
>
> "Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
> news:RN6dnQUOi99QJFHfRVn-qA@xxxxxxxxxxxxxx
> >
> > "Dave" <daves@xxxxxxxx> wrote in message
> > news:29413$42cc8ada$943fdd6e$27226@xxxxxxxxxxxxxxx
> >> I realize that the 6270 is no substitute for a lighting control system,
> > but
> >> is it possible to name the lighting outputs dislayed on the 6270?
> >>
> >> I just installed my 6270, and upgraded from a Vista20P-R2.5 to a
> >> Vista20P-R3. Do I need a different panel to name these outputs, or is
it
> >> just not supported? The manual does not mention it at all.
> >>
> >> dave
> >
> > Can't name the outputs
> >
> >
>
>