Re: Ademco 6270 Lighting Control

["HoneywellTech" <seccon1@xxxxxxxxxxx>]

Mark is Correct,

If you want to use Output names then the control has to have a menu that
allows that options such as V128BP etc
"Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
news:5o2dnWx6pbBaLVDfRVn-tQ@xxxxxxxxxxxxxx
> If the panel supports naming the outputs then I would think the 6270 would
> as well although I've not tested it on anything larger than a V-20P
>
> "Dave" <daves@xxxxxxxx> wrote in message
> news:d6391$42ccf5d3$943fdd6e$1756@xxxxxxxxxxxxxxx
> > Thanks Mark.
> >
> > I noticed when booting up, the 6270 says something like "Receiving
output
> > descriptions" after it goes through "receiving zone descriptions", so I
> > thought maybe a Vista 50P or 128 or 250 might support it.
> >
> > Must be a "reserved for future expansion" kind of thing.
> >
> > Dave
> >
> > "Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
> > news:RN6dnQUOi99QJFHfRVn-qA@xxxxxxxxxxxxxx
> > >
> > > "Dave" <daves@xxxxxxxx> wrote in message
> > > news:29413$42cc8ada$943fdd6e$27226@xxxxxxxxxxxxxxx
> > >> I realize that the 6270 is no substitute for a lighting control
system,
> > > but
> > >> is it possible to name the lighting outputs dislayed on the 6270?
> > >>
> > >> I just installed my 6270, and upgraded from a Vista20P-R2.5 to a
> > >> Vista20P-R3. Do I need a different panel to name these outputs, or is
> it
> > >> just not supported? The manual does not mention it at all.
> > >>
> > >> dave
> > >
> > > Can't name the outputs
> > >
> > >
> >
> >
>
>