[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Smarthome PowerLinc 1132B frequent failures

Subject: Re: Smarthome PowerLinc 1132B frequent failures
From: "machead" <gregjsmith@xxxxxxx>
Date: 11 Dec 2006 16:30:53 -0800
Newsgroups: comp.home.automation
References: <1165700029.873745.112110@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

I had a PowerLinc 2414u that failed about 6 months ago. It would still
work fine with Insteon stuff but would no longer send or receive X10
signals. A few other people on the Indigo message board had the same
problem.

--http://homepage.mac.com/gregjsmith/index.html

On Dec 9, 2:33 pm, googlegro...@xxxxxxxxxxxxx wrote:

> The 1132B fails fairly often, perhaps every six months or so.
> Monitoring the X10 signals with another unit and the Synapse PC
> software shows symptoms of seemingly garbled commands.

References:
- Smarthome PowerLinc 1132B frequent failures
  - From: googlegroups

Prev by Message: Re: Hard-wired HA lighting; was Re: XTB, reliablity, etc.
Next by Message: Re: Ability to drive multiple IR transmitters independantly from PC
Previous by thread: Re: Smarthome PowerLinc 1132B frequent failures
Next by thread: CBus and Minder - New Install Mawson Lakes
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home