[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Outdoor camera connections.



On Saturday, March 23, 2013 1:17:41 PM UTC-4, sp...@xxxxxxxxxxxxx wrote:
>  Use a 3 to 4 Inch flat masonry chisel and a large hammer to prepare the =
surface flat where you will mount the equipment with just a small amount of=
 extra flattened area to caulk around mount and box edges. Keeping in mind =
connectors are never a good idea to bury in a wall (which I see you already=
 agree) but also, with the connectors of a factory pre-wired "Pigtail" you =
will have no way to trouble shoot or adjust the view of the camera from out=
side AT the camera, now it just became a TWO MAN JOB.

Great point!!!=20

I use a wrist monitor to adjust the camera so I don't have to go back up th=
e ladder. Yep, gotta put a junction box on the outside with the camera.=20



alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home