[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: wire stripper recommendation

Subject: Re: wire stripper recommendation
From: "Robert L Bass" <Sales@xxxxxxxxxxxxxxxxxxxxx>
Date: Mon, 9 Nov 2009 14:12:20 -0500
Newsgroups: alt.security.alarms
References: <esqdnQXaDamc3mvXnZ2dnUVZ_hOdnZ2d@xxxxxxxxxxxx> <7lntqiF3c9dk0U1@xxxxxxxxxxxxxxxxxx> <_jBJm.51086$Db2.37367@edtnps83> <hd9bsk$mgb$1@xxxxxxxxxxxxxxxxxxxxxxxxxx>

"Bob La Londe" wrote:
>
> crimping beanie connectors with diagonal cutters...

There's an easy way to crimp B connectors with diagonal cutters without
problems.  Put the connector on the handle side of the pivot.  My cutters had a
flat spot there which made it easy.  OTOH, I rarely used B connectors.  I always
preferred to solder my connections, especially if they would be hidden behind
the wall.

--

Regards,
Robert L Bass

==============================>
Bass Home Electronics
DIY Alarm and Home Automation Store
http://www.bassburglaralarms.com
Sales & Service 941-870-2310
Fax 941-870-3252
==============================>

Follow-Ups:
- Re: wire stripper recommendation
  - From: Frank Olson
- Re: wire stripper recommendation
  - From: CH®IS

References:
- wire stripper recommendation
  - From: Christopher Glaeser
- Re: wire stripper recommendation
  - From: Bill
- Re: wire stripper recommendation
  - From: CH®IS
- Re: wire stripper recommendation
  - From: Bob La Londe

Prev by Message: Re: What's the fate of Concord and NetworX
Next by Message: Re: Ping: Jim (Napco PCI-Mini)
Previous by thread: Re: wire stripper recommendation
Next by thread: Re: wire stripper recommendation
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home