Re: eol dsc1550

[joe <klcross@xxxxxxxxxxx>]

Crash Gordon wrote:
> ot: you guys are not up in vegas I guess?
>
>
>
I'm not up in Vegas but who is?

I made all zones, 1, 3 which is slow &
silent and Interior Home-Away Loop.
With no fire zone. Then I made all zones
normally closed without a end of line
resistor. This works fine, all zones are
  off, and the ready light is on the
keypad.

The trouble light is coming on now after
a few minutes, which points to the battery.

I am going to give it a few hours then
go back and check to see if the battery
trouble light remains on.

I had to come back to this newsgroup and
read about what the board should be
putting out for the battery. The Battery
is new. If when I go back and the
trouble light is still on. The float
charges is around what 13.4 to 13.8. I
will just put a meter to the plus and
minus sides of the battery wires, to
check this. Would this be correct? I
want to see if the board is charging the
battery.

Thanks, Joe

PS I've only been to Vegas once, that
was when I was younger, and now I have
more bills to pay.