[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Moose Z1100 Dialing Problem

Subject: Re: Moose Z1100 Dialing Problem
From: "Robert L Bass" <RobertLBass@xxxxxxxxxxx>
Date: Tue, 07 Aug 2007 07:07:22 GMT
Newsgroups: alt.security.alarms
References: <762caed5cb5a5@uwe> <QcUsi.14534$TW6.10449@xxxxxxxxxxxx> <76320234be03c@uwe> <YM1ti.55876$kK1.14880@xxxxxxxxxxxx> <7633e3408b232@uwe> <ii4ti.66867$6K3.64058@xxxxxxxxxxxx> <46b51891$0$505$815e3792@xxxxxxxxxxxxxx> <1186450930.846623.37060@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <76516df4cdd39@uwe> <46b7f9be$0$10298$815e3792@xxxxxxxxxxxxxx>

> aggggg...you're using an LED keypad to program that beast?!

On the original Z1100 that was the only option.  They weren't
hard to program.  They had far fewer addresses than modern
panels do.

--

Regards,
Robert L Bass

=============================>
Bass Home Electronics
941-925-8650
4883 Fallcrest Circle
Sarasota · Florida · 34233
http://www.bassburglaralarms.com
=============================>

References:
- Moose Z1100 Dialing Problem
  - From: mmar
- Re: Moose Z1100 Dialing Problem
  - From: Buggs
- Re: Moose Z1100 Dialing Problem
  - From: mmar via HomeKB.com
- Re: Moose Z1100 Dialing Problem
  - From: Buggs
- Re: Moose Z1100 Dialing Problem
  - From: mmar via HomeKB.com
- Re: Moose Z1100 Dialing Problem
  - From: Buggs
- Re: Moose Z1100 Dialing Problem
  - From: Crash Gordon
- Re: Moose Z1100 Dialing Problem
  - From: Jim
- Re: Moose Z1100 Dialing Problem
  - From: mmar via HomeKB.com
- Re: Moose Z1100 Dialing Problem
  - From: Crash Gordon

Prev by Message: Re: BIG C unfair continued
Next by Message: Re: DSC 4020 CF
Previous by thread: Re: Moose Z1100 Dialing Problem
Next by thread: Re: Moose Z1100 Dialing Problem
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home