[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Moose Z1100 Dialing Problem

Subject: Re: Moose Z1100 Dialing Problem
From: Jim <alarminex@xxxxxxx>
Date: Mon, 06 Aug 2007 18:38:44 -0700
Newsgroups: alt.security.alarms
References: <762caed5cb5a5@uwe><QcUsi.14534$TW6.10449@xxxxxxxxxxxx> <76320234be03c@uwe> <YM1ti.55876$kK1.14880@xxxxxxxxxxxx> <7633e3408b232@uwe> <ii4ti.66867$6K3.64058@xxxxxxxxxxxx> <46b51891$0$505$815e3792@xxxxxxxxxxxxxx>

On Aug 4, 7:23?pm, "Crash Gordon" <webmas...@xxxxxxxxxxxxxxxxxxxxx>
wrote:
> probably going to wrong type of receiver line card that's not detecting the
> old handshake.
>


Could be that there's phone numbers programed but no account number.

It would dial and then do nothing. Then  hang up.

References:
- Moose Z1100 Dialing Problem
  - From: mmar
- Re: Moose Z1100 Dialing Problem
  - From: Buggs
- Re: Moose Z1100 Dialing Problem
  - From: mmar via HomeKB.com
- Re: Moose Z1100 Dialing Problem
  - From: Buggs
- Re: Moose Z1100 Dialing Problem
  - From: mmar via HomeKB.com
- Re: Moose Z1100 Dialing Problem
  - From: Buggs
- Re: Moose Z1100 Dialing Problem
  - From: Crash Gordon

Prev by Message: Re: Moose Z1100 Dialing Problem
Next by Message: Re: Andersen 400 Series Security contacts
Previous by thread: Re: Moose Z1100 Dialing Problem
Next by thread: Re: Moose Z1100 Dialing Problem
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home