[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Moose Z1100 Dialing Problem

Subject: Re: Moose Z1100 Dialing Problem
From: "Robert L Bass" <RobertLBass@xxxxxxxxxxx>
Date: Sun, 05 Aug 2007 02:35:51 GMT
Newsgroups: alt.security.alarms
References: <762caed5cb5a5@uwe> <QcUsi.14534$TW6.10449@xxxxxxxxxxxx> <76320234be03c@uwe> <YM1ti.55876$kK1.14880@xxxxxxxxxxxx> <7633e3408b232@uwe> <ii4ti.66867$6K3.64058@xxxxxxxxxxxx> <46b51891$0$505$815e3792@xxxxxxxxxxxxxx>

Try adding a delay to wait for dial tone before dialing.

--

Regards,
Robert L Bass

=============================>
Bass Home Electronics
941-925-8650
4883 Fallcrest Circle
Sarasota · Florida · 34233
http://www.bassburglaralarms.com
=============================>

References:
- Moose Z1100 Dialing Problem
  - From: mmar
- Re: Moose Z1100 Dialing Problem
  - From: Buggs
- Re: Moose Z1100 Dialing Problem
  - From: mmar via HomeKB.com
- Re: Moose Z1100 Dialing Problem
  - From: Buggs
- Re: Moose Z1100 Dialing Problem
  - From: mmar via HomeKB.com
- Re: Moose Z1100 Dialing Problem
  - From: Buggs
- Re: Moose Z1100 Dialing Problem
  - From: Crash Gordon

Prev by Message: Re: Installation/Upgrade info needed for Safewatch Pro 3000EN, from Tyco / ADT
Next by Message: Re: POS integration
Previous by thread: Re: Moose Z1100 Dialing Problem
Next by thread: Re: Moose Z1100 Dialing Problem
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home