Re: Secure Window

["ABLE_1" <royboynospam@xxxxxxxxxxxxx>]

Thanks for the input.  These windows are the Bryn Mar II units.  I doubt it
will make much difference but I will look into the possibilities of what you
have indicated.

Thanks.

Les



>
> One problem with vinyl windows is seating a recessed magnet.  Most
> vinyl windows have too narrow a space at the bottom of the sash.
> Certainteed's "Devon" line is an exception.  There's a hollow chamber
> in the bottom rail deep enough to fit a "stubby" magnet.
> Unfortunately, the upper rail's chamber is too short for a recessed
> magnet.  Even a stubby model probably won't fit.
>
> Better yet, there's a recessed space deep enough to cement a "rare
> earth" magnet in place without even drilling the sash.  That approach
> minimizes warranty concerns.  The space is on both the upper and lower
> rails.
>
> Certainteed replacement windows come with vinyl frames which fit into
> the pre-existing window opening.  The frames have a hollow space which
> is deep enough to fit the recessed magnetic switch.  Sometimes the
> switch can work loose if it's not seated in something thicker than the
> vinyl frame.  To prevent this, smooth a tiny dab of RTV (silicone
> caulk) around the switch before seating it in the hole.  This will also
> prevent water seepage, though most such window frames have weep holes
> to allow any water that does get in to run out.
>
> Note that Certainteed's warranty does provide an out for them if they
> believe your work has contributed to any damage.  They state,
> "CertainTeed shall have no liability under this warranty for: A.
> Defects or failure caused by improper handling or storage or by
> installation not in strict adherence with CertainTeed's written
> instructions."  That would certainly include damage caused by drilling
> the sash since they make no mention of it in their installation
> instructions.
>
> Regards,
> Robert L Bass
> Badd Home Electronics
> www.BassBurglarAlarms.com
>