Re: Honeywell 5894PI question

["ck" <ck@xxxxxxxxxxx>]

Thanks Frank, This is a wireless detector I am replacing.
"Frank Olson" <Use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:aFXRf.146589$B94.45938@xxxxxxxxxxx
> ck wrote:
>> I currently have ADT (Ademco Vista-10se) and I want to replace the motion
>> detector with the Honeywell 5894PI. The one I have now is for small pets
>> and I have a larger dog and need the 80lb threshold. Do I need a tech to
>> switch them out? Where can I get a install guide(Not just where to place
>> it). I searched the web and found nothing. Any advice would be
>> appreciated.
>> Thanks,Chris
>
>
> The installation instructions for the motion detector are included with
> the part.  It'll tell you how to set it up and adjust it for optimum
> performance.  It'll also go into detail about "walk-testing" it.  When you
> remove the old detector make sure you identify the "positive and negative"
> power and switch terminals.  Hook up the new sensor exactly the same way
> and you shouldn't have any problem.  One extra word of advice, make sure
> you power down your system before changing out any device.  You don't want
> to short anything.
>
> Good luck!!
>
> Frank Olson
> http://www.yoursecuritysource.com