Re: DSC 632 1555MX & TLM troubles

["Mark Leuck" <m..leuck@xxxxxxxxxxx>]

Best thing to do is turn off TLM, DSC 's implementation isn't very good

"JasonN" <jason.norred@xxxxxxxxx> wrote in message
news:1151680924.256673.77830@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Ok... Here is what I did this morning to test...
>
> I disconnected the yellow/black pair coming out of the alarm panel and
> connected my butt-set directly to the panel on the return side. Within
> a few seconds of going off hook with my butt-set, the alarm goes into
> trouble and comes out of trouble when I go back on hook. I tested the
> voltage on both sides of the panel. I'm still getting 50v dc on both
> sides, but now I only get 5.5v dc when I'm off hook.
>
> Also, after browsing the net I see that most people have a RJ31x jack
> before the alarm panel. My original installer didn't put one in. My
> telco line comes straight into the panel from the demarc.
>
> Any ideas?
>
> Jason
>