Re: DSC 632 1555MX & TLM troubles

["mikey" <loismustdie@xxxxxxxxx>]

"JasonN" <jason.norred@xxxxxxxxx> wrote in message
news:1151680924.256673.77830@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Ok... Here is what I did this morning to test...

I disconnected the yellow/black pair coming out of the alarm panel and
connected my butt-set directly to the panel on the return side. Within
a few seconds of going off hook with my butt-set, the alarm goes into
trouble and comes out of trouble when I go back on hook. I tested the
voltage on both sides of the panel. I'm still getting 50v dc on both
sides, but now I only get 5.5v dc when I'm off hook.

Also, after browsing the net I see that most people have a RJ31x jack
before the alarm panel. My original installer didn't put one in. My
telco line comes straight into the panel from the demarc.

Any ideas?

What's the delay set to in section 370 ?


Jason



--
Posted via a free Usenet account from http://www.teranews.com