Re: need help to reset 449CST wireless smoke detector

["mz" <mzhao2005@xxxxxxxxx>]

Thanks very much for your help.  If the system is not in normal
condition - not in ready status, will the alarm be triggered if the
power of the smoke detector removed?

alarman wrote:
> If you reset the detector by removing power, and then it immediately goes
> into alarm, you need to either remove and clean the optical chamber, or
> replace the detector.  If on the other hand you tried the reset sequence
> specific to your control panel and the detector simply didn't reset, either
> your control may be improperly programmed, or the smoke detector is not
> connected to the switched circuit.
> js
> "mz" <mzhao2005@xxxxxxxxx> wrote in message
> news:1151466605.547725.24620@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > Mark,
> >
> > Thanks for your reply.  I have tried to reset the smoke detector from
> > kaypad (*72).  It failed to reset.  Is there anyway to reset from the
> > detector?
> >
> > mz
> >
> > Mark Leuck wrote:
> >> "mz" <mzhao2005@xxxxxxxxx> wrote in message
> >> news:1151463164.126693.189120@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> >> > need help to reset 449CST wireless smoke detector
> >>
> >> *71
> >>
> >> (snerk)
> >