Re: need help to reset 449CST wireless smoke detector

["J Barnes" <trishnjames@xxxxxxxxxxx>]

The siren will not be triggered but you should get a trouble indication or
sound.  It does not matter what status the alarm is showing.  Fire zones are
active 24 hours.

James


"mz" <mzhao2005@xxxxxxxxx> wrote in message
news:1151540824.921658.3590@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Thanks very much for your help.  If the system is not in normal
> condition - not in ready status, will the alarm be triggered if the
> power of the smoke detector removed?
>
> alarman wrote:
>> If you reset the detector by removing power, and then it immediately goes
>> into alarm, you need to either remove and clean the optical chamber, or
>> replace the detector.  If on the other hand you tried the reset sequence
>> specific to your control panel and the detector simply didn't reset,
>> either
>> your control may be improperly programmed, or the smoke detector is not
>> connected to the switched circuit.
>> js
>> "mz" <mzhao2005@xxxxxxxxx> wrote in message
>> news:1151466605.547725.24620@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> > Mark,
>> >
>> > Thanks for your reply.  I have tried to reset the smoke detector from
>> > kaypad (*72).  It failed to reset.  Is there anyway to reset from the
>> > detector?
>> >
>> > mz
>> >
>> > Mark Leuck wrote:
>> >> "mz" <mzhao2005@xxxxxxxxx> wrote in message
>> >> news:1151463164.126693.189120@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> >> > need help to reset 449CST wireless smoke detector
>> >>
>> >> *71
>> >>
>> >> (snerk)
>> >
>