Re: Firelite Power problems (in general)

[Mike Sokoly <secure15@xxxxxxxxxxxxx>]

Rocky: Question?
        How do you reset the output levels to a higher voltage? And BTW:
thanks for the heads-up on the Telco pins- System in question went 4
days without any problems, normal 24 Hr tests on Both Lines, then
yesterday- "Abnormal Test" (24 Hr didnt come in) checked the CS report:
sure enough: "TELCO 1 TBLS AGAIN!" Will do a thorough check of the pins
on Monday!
Sorry, can't agree with you- I DESPISE FIRELITE!
Mike S

Rocky_T_Squirrel, Esq. wrote:
> Firelite  in general,
> I've notice that the charger ckt is always set right on the edge of fail
> detection.
> I reset the output level right out of the box to a slightly higher voltage.
> (as recommended from a service tech from firelite, about 8 years ago)
> to date (knock on wood) I haven't had any more problems with firelite power
> supplies.
> As for the dialers (whatever panel your using)  I've noticed a LOT of bad
> solder connections
> on the telephone line sockets..  I've had to resolder several to stop
> intermittant line failure
> signals.  (it seems if you send it back to firelite  they never see the
> problem)
> I've been using Firelite products for going on 18 years  with only the above
> problems..
> all in all  I like the product.  But thats just me..
> RTS
>
>