Re: DSC 632 - Using both 900Mhz and 433Mhz sensors

["James B" <trishnjames@removethis@comcast.net>]

I have recently added a Street Smart reciever to a power 832 DSC control
that has 900mhz wireless.  The set up works just fine.  The street smart
does not enroll on the system and therfore will work no matter what other
reciever you have.

I was told by my distributor that the module to allow 2 recievers is on
their shelves now, :)  but for the price, a street smart was the way to go
if you only wanted key fobs'.

James


"Doug L" <vssdoug@xxxxxxx> wrote in message
news:zdQif.1707$4v.191@xxxxxxxxxxxxx
> The DSC receivers have to be enrolled into the system as a unique module,
> the panel will only allow one wireless module to be enrolled without using
> the 5320 which won't let you mix 900 & 433 receivers.
> The universal receivers normally don't have to be enrolled as a module,
> they either simply draw power from the panel and have a relay output that
> will trigger a zone on the panel programmed as momentary arm/disarm, or
> they just sit on the bus without being enrolled and more or less simulate
> a keypad, pressing the arm/disarm button in this case will in effect send
> a preprogrammed code to the system that will be interpreted by the panel
> as a valid code as if entered at a keypad . At least thats my
> understanding of it
>
> Doug L
>
> --
>
> "Impalpable" <spdb66@xxxxxxxxxx> wrote in message
> news:1133219068.791896.76500@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> How would the secure wireless universal be any different than using the
>> DSC module that only does key fobs ?  I would still have two receivers
>> on the same system.  Perhaps I am missing something?  Thanks foor your
>> help everyone.
>>
>
>