[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Help needed with programming for DSC PC2530

Subject: Re: Help needed with programming for DSC PC2530
From: "Mark Leuck" <m..leuck@xxxxxxxxxxx>
Date: Thu, 12 May 2005 23:19:26 -0500
Newsgroups: alt.security.alarms
References: <d60ss40h22@xxxxxxxxxxxxxxxxxx> <54Tge.1327018$8l.1039541@pd7tw1no> <A7ednZ67PoEXYh7fRVn-sA@xxxxxxxxxx> <d60v9u01amg@xxxxxxxxxxxxxxxxxx> <lMKdneX8kdn7ixnfRVn-og@xxxxxxxxxxx> <FJudnVSf-4VyihnfRVn-rA@xxxxxxxxxx>

"R.H.Campbell" <rh.campbell@xxxxxxxxxxxxx> wrote in message
news:FJudnVSf-4VyihnfRVn-rA@xxxxxxxxxxxxx
> Oops ! I was assuming a typo...that he had a PC 2550 by DSC. Guess this
> gentleman will have to bite the bullet and hardware default the unit and
> start fresh (you can do that can't you Mark with this device..)
>
> Who makes the PC2530 anyway ?
>
> RHC

It was a PC2500 with a couple of very minor program changes made for
Emergency Networks who I worked for at one time.

Follow-Ups:
- Re: Help needed with programming for DSC PC2530
  - From: Brian O
- Re: Help needed with programming for DSC PC2530
  - From: Doug L

References:
- Help needed with programming for DSC PC2530
  - From: Brian O
- Re: Help needed with programming for DSC PC2530
  - From: Frank Olson
- Re: Help needed with programming for DSC PC2530
  - From: R.H.Campbell
- Re: Help needed with programming for DSC PC2530
  - From: Brian O
- Re: Help needed with programming for DSC PC2530
  - From: Mark Leuck
- Re: Help needed with programming for DSC PC2530
  - From: R.H.Campbell

Prev by Message: Re: NFPA's Creation of Security Standards/Codes
Next by Message: Re: Want to move Brinks keypad
Previous by thread: Re: Help needed with programming for DSC PC2530
Next by thread: Re: Help needed with programming for DSC PC2530
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home