Re: Want to move Brinks keypad

["Robert L. Bass" <robertlbass@xxxxxxxxxxx>]

>I want to move the keypad to my Brinks system to the other side of the
>laundry room, about 6 feet away from it's present location.  I plan to
>disconnect it, pull the wire up out of the wall, thread the same wire back
>down into the opposite wall and then reconnect the keypad.  I'm wondering
>if I will run into any trouble doing this.  I would reconnect the same
>color wires where they were before.
> Would it cause my system to lose any codes?  I know Brinks would charge
> over $150 to do this, so I'm trying to do it myself.  Reason:  Just bought
> a new freezer that is now blocking access to the keypad.

You should have no problem doing this, friend.  Just be sure to disconnect
power from the Brinks control panel *before* you touch the wiring.  Unplug
the transformer and remove the backup battery.  After you're finished,
restore power.

--

Regards,
Robert L Bass

=============================>
Bass Home Electronics
2291 Pine View Circle
Sarasota · Florida · 34231
877-722-8900 Sales & Tech Support
http://www.bassburglaralarms.com
=============================>