Re: Want to move Brinks keypad

["Russ Brill" <russwbrill@xxxxxxxxxxxxx>]

Ya forgot to have 'em reset the system clock too........... :^))

"Robert L. Bass" <robertlbass@xxxxxxxxxxx> wrote in message
news:8O2dnRmndprVYebfRVn-gw@xxxxxxxxxxxxxx
> >I want to move the keypad to my Brinks system to the other side of the
> >laundry room, about 6 feet away from it's present location.  I plan to
> >disconnect it, pull the wire up out of the wall, thread the same wire
back
> >down into the opposite wall and then reconnect the keypad.  I'm wondering
> >if I will run into any trouble doing this.  I would reconnect the same
> >color wires where they were before.
> > Would it cause my system to lose any codes?  I know Brinks would charge
> > over $150 to do this, so I'm trying to do it myself.  Reason:  Just
bought
> > a new freezer that is now blocking access to the keypad.
>
> You should have no problem doing this, friend.  Just be sure to disconnect
> power from the Brinks control panel *before* you touch the wiring.  Unplug
> the transformer and remove the backup battery.  After you're finished,
> restore power.
>
> --
>
> Regards,
> Robert L Bass
>
> =============================>
> Bass Home Electronics
> 2291 Pine View Circle
> Sarasota · Florida · 34231
> 877-722-8900 Sales & Tech Support
> http://www.bassburglaralarms.com
> =============================>
>
>