Re: DSC 5010 Communication Problem

["Allan Waghalter" <awaghalter@xxxxxxxxxxx>]

You are not supposed to power a Napco panel from the battery first.
Instructions are to apply AC first.
Allan

"Russell Brill" <russwbrill@xxxxxxxxxxxxx> wrote in message
news:V8gof.3047$n1.2425@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Only thing I've noticed about Napco panels (Gemini panels) that's strange,
> if you power the panel from the battery first and begin testing without
> applying AC the system won't accept new user codes... After applying AC
> and waiting 5 to 10 minutes, the problem goes away....
>
> "Allan Waghalter" <awaghalter@xxxxxxxxxxx> wrote in message
> news:bnfof.3934$nA2.3784@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> Personal choice is Napco!  Does what it says it will do, simple to work,
>> seldom a problem, extremely good tech support (even for New Yorkers) and
>> their software works!
>>
>> "Chub" <w@xxxxx> wrote in message
>> news:5Yeof.9114$kP5.3187@xxxxxxxxxxxxxxxxxxxxxxxxx
>>>
>>> "Allan Waghalter" <awaghalter@xxxxxxxxxxx> wrote in message
>>> news:14Nnf.3841$rq3.538@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>>>I did a takeover today on a 5010.  It is a brand new unit, version 2.0
>>>>and I have the appropriate software, however, I can connect, but the
>>>>panel does not send data and the connection aborts.  Tech Support thinks
>>>>its a noisy phone line, but it sounds perfectly clear to me.  It is also
>>>>a fully dedicated pots line just for the alarm system.   Any ideas?
>>>
>>> put in an GE NX system
>>>
>>
>>
>
>