Re: DSC 5010 Communication Problem

["Jackcsg" <nospam@xxxxxxxxxx>]

That's why they suck when you loose power....
With a real control panel.....it doesn't matter, nor should it.

"Allan Waghalter" <awaghalter@xxxxxxxxxxx> wrote in message
news:u8kof.3892$rq3.1593@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> You are not supposed to power a Napco panel from the battery first.
> Instructions are to apply AC first.
> Allan
>
> "Russell Brill" <russwbrill@xxxxxxxxxxxxx> wrote in message
> news:V8gof.3047$n1.2425@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > Only thing I've noticed about Napco panels (Gemini panels) that's
strange,
> > if you power the panel from the battery first and begin testing without
> > applying AC the system won't accept new user codes... After applying AC
> > and waiting 5 to 10 minutes, the problem goes away....
> >
> > "Allan Waghalter" <awaghalter@xxxxxxxxxxx> wrote in message
> > news:bnfof.3934$nA2.3784@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> >> Personal choice is Napco!  Does what it says it will do, simple to
work,
> >> seldom a problem, extremely good tech support (even for New Yorkers)
and
> >> their software works!
> >>
> >> "Chub" <w@xxxxx> wrote in message
> >> news:5Yeof.9114$kP5.3187@xxxxxxxxxxxxxxxxxxxxxxxxx
> >>>
> >>> "Allan Waghalter" <awaghalter@xxxxxxxxxxx> wrote in message
> >>> news:14Nnf.3841$rq3.538@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> >>>>I did a takeover today on a 5010.  It is a brand new unit, version 2.0
> >>>>and I have the appropriate software, however, I can connect, but the
> >>>>panel does not send data and the connection aborts.  Tech Support
thinks
> >>>>its a noisy phone line, but it sounds perfectly clear to me.  It is
also
> >>>>a fully dedicated pots line just for the alarm system.   Any ideas?
> >>>
> >>> put in an GE NX system
> >>>
> >>
> >>
> >
> >
>
>