Re: DSC 5010 Communication Problem

["Russell Brill" <russwbrill@xxxxxxxxxxxxx>]

Allan,

I knew there was a reason Napco included a manual with the panel :-))

Regards,
Russ

"Allan Waghalter" <awaghalter@xxxxxxxxxxx> wrote in message
news:u8kof.3892$rq3.1593@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> You are not supposed to power a Napco panel from the battery first.
> Instructions are to apply AC first.
> Allan
>
> "Russell Brill" <russwbrill@xxxxxxxxxxxxx> wrote in message
> news:V8gof.3047$n1.2425@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> Only thing I've noticed about Napco panels (Gemini panels) that's
>> strange, if you power the panel from the battery first and begin testing
>> without applying AC the system won't accept new user codes... After
>> applying AC and waiting 5 to 10 minutes, the problem goes away....
>>
>> "Allan Waghalter" <awaghalter@xxxxxxxxxxx> wrote in message
>> news:bnfof.3934$nA2.3784@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>> Personal choice is Napco!  Does what it says it will do, simple to work,
>>> seldom a problem, extremely good tech support (even for New Yorkers) and
>>> their software works!
>>>
>>> "Chub" <w@xxxxx> wrote in message
>>> news:5Yeof.9114$kP5.3187@xxxxxxxxxxxxxxxxxxxxxxxxx
>>>>
>>>> "Allan Waghalter" <awaghalter@xxxxxxxxxxx> wrote in message
>>>> news:14Nnf.3841$rq3.538@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>>>>I did a takeover today on a 5010.  It is a brand new unit, version 2.0
>>>>>and I have the appropriate software, however, I can connect, but the
>>>>>panel does not send data and the connection aborts.  Tech Support
>>>>>thinks its a noisy phone line, but it sounds perfectly clear to me.  It
>>>>>is also a fully dedicated pots line just for the alarm system.   Any
>>>>>ideas?
>>>>
>>>> put in an GE NX system
>>>>
>>>
>>>
>>
>>
>
>