Re: DSC 5010 Communication Problem

["Mark Leuck" <m..leuck@xxxxxxxxxxx>]

I tend to agree, they aren't subject to the same price pressures of the
other manufacturers

"Jackcsg" <nospam@xxxxxxxxxx> wrote in message
news:cOKdnVDLNs9zMT_enZ2dnUVZ_tydnZ2d@xxxxxxxxxxxxxxx
> Russ....lay off the sauce. That will never happen....
>
> "Russell Brill" <russwbrill@xxxxxxxxxxxxx> wrote in message
> news:RZnof.3197$n1.473@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > Jack,
> >
> > What are you going to do when DMP moves their factory to Mexico???
> >
> > :-))
> >
> > "Jackcsg" <nospam@xxxxxxxxxx> wrote in message
> > news:tJednegwXY-Plz_eRVn-qg@xxxxxxxxxxxxxxx
> > > That's why they suck when you loose power....
> > > With a real control panel.....it doesn't matter, nor should it.
> > >
> > > "Allan Waghalter" <awaghalter@xxxxxxxxxxx> wrote in message
> > > news:u8kof.3892$rq3.1593@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > >> You are not supposed to power a Napco panel from the battery first.
> > >> Instructions are to apply AC first.
> > >> Allan
> > >>
> > >> "Russell Brill" <russwbrill@xxxxxxxxxxxxx> wrote in message
> > >> news:V8gof.3047$n1.2425@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > >> > Only thing I've noticed about Napco panels (Gemini panels) that's
> > > strange,
> > >> > if you power the panel from the battery first and begin testing
> without
> > >> > applying AC the system won't accept new user codes... After
applying
> AC
> > >> > and waiting 5 to 10 minutes, the problem goes away....
> > >> >
> > >> > "Allan Waghalter" <awaghalter@xxxxxxxxxxx> wrote in message
> > >> > news:bnfof.3934$nA2.3784@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > >> >> Personal choice is Napco!  Does what it says it will do, simple to
> > > work,
> > >> >> seldom a problem, extremely good tech support (even for New
Yorkers)
> > > and
> > >> >> their software works!
> > >> >>
> > >> >> "Chub" <w@xxxxx> wrote in message
> > >> >> news:5Yeof.9114$kP5.3187@xxxxxxxxxxxxxxxxxxxxxxxxx
> > >> >>>
> > >> >>> "Allan Waghalter" <awaghalter@xxxxxxxxxxx> wrote in message
> > >> >>> news:14Nnf.3841$rq3.538@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > >> >>>>I did a takeover today on a 5010.  It is a brand new unit,
version
> > >> >>>>2.0
> > >> >>>>and I have the appropriate software, however, I can connect, but
> the
> > >> >>>>panel does not send data and the connection aborts.  Tech Support
> > > thinks
> > >> >>>>its a noisy phone line, but it sounds perfectly clear to me.  It
is
> > > also
> > >> >>>>a fully dedicated pots line just for the alarm system.   Any
ideas?
> > >> >>>
> > >> >>> put in an GE NX system
> > >> >>>
> > >> >>
> > >> >>
> > >> >
> > >> >
> > >>
> > >>
> > >
> > >
> >
> >
>
>