Re: Adding a third keypad to a Caddx NX-8, wiring help requested!

[joe <nospam@xxxxxx>]

brim wrote:

> Thanks for the tips re: stranded v. solid core wire, but back to my
> original question... :)
>
> My system is a fairly small one (6 zones... 3 doors, motion, 2 smoke)
> so I really doubt it's partitioned, although I'm really not sure and
> have no idea how to check/verify this.  That being said, do I still
> need to go through the partition programming (I'm guessing maybe it's
> all on partition 1 or 0...whichever it starts out at).  Looks like
> *-9-4 gets me to the set keypad number options...I guess this shouldn't
> be that difficult.
>
> Also, where's a good place to pick up stranded 22-24/4 wire for this
> job?  I don't need a 500ft spool and that seems to be all I can find
> online.  Would Lowes/Home Depot carry this by-the-foot?  Thanks for
> your help.
>

*94 [program code] the service led & instant led will flash
enter keypad #. [prob 3]
press *, instant led steady, service led flash.
enter partition # [1].
keypad will automatically exit prog mode now.