The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: AM12U and Low Energy Bulbs


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: AM12U and Low Energy Bulbs
  • From: "Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>
  • Date: Thu, 10 Jan 2002 22:52:14 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Hi, I took it no further as my loft conversion has taken over everything
:-((((

I am still intending to look into this ASAP! in fact I now have a lot of
stuff to look into at the present time!...........In fact my AP does not
work at all now :-(((((((ho hum....

Don't work get in the way of your private like?????

B.

-----Original Message-----
From: Ian B [mailto:Ian@xxxxxxx]
Sent: 10 January 2002 19:00
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] AM12U and Low Energy Bulbs


Brian Reynolds and myself looked at this with Brian doing the surgery. The
essence of this was that the diagrams we had were for the US model units
and
bore little resemblance to the ones we had. Neither of us felt like tracing
the unit and producing a circuit diagram to find the current sense section.

We gave up. As far as I know Brian took it no further

Ian B

-----Original Message-----
From: Paul Smith [mailto:wheelbarrowhandle@xxxxxxx]
Sent: 10 January 2002 10:46
To: ukha_d@xxxxxxx
Subject: [ukha_d] AM12U and Low Energy Bulbs


Hi guys, my second on topic post.

I been though the archive to try and resolve this and have come unstuck.

I have several of the home base Appliance Modules (AM12U). What is
confusing me is that with low energy bulbs plugged into them they
sometimes flash dimly when the relay is off.

Having seen a thread about a led that stayed on I followed it and have
cut the leg of D5. Which I think is the correct diode to remove local
current sense. However having done this the bulb still flashes and the
unit still operators correctly.

Can anyone give me an idea as to what is going on. I did cut the return
lead going to the output of the relay, but that stopped the unit from
operating correctly.


Thanks In advance for your support.

I love reading this group it has had me on the floor on more than one
occasion.

Regards,

Paul




For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/






For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.