[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: VU1 ESL bulbs with HA dimmers?



I think that was only for color TVs where the voltage is 32,000 volts.
Radiation increases with the voltage. It's not likely that these lights will
have anywhere near that voltage - not if they are going to fit existing
fixtures.

"D&SW" <d&sw@xxxxxxxxxxx> wrote:

>Yes, I would guess voltage to be faily low also, but bulb glass is much
>thinner and non leaded as in a CRT. I was just thinking of back in the late
>60s, early 70s (yeah, I'm a geezer, not a geek) when government mandated
>more shielding around high voltage rectifier and damper cage in TVs because
>of X-rays out the bottom of the set.  I think this applied to B&W sets also.
>Perhaps I have been living too long in the "progressive" world of Chicken
>Little and the Sky is Falling. ;-)
>
>"Dave Houston" <nobody@xxxxxxxxxxxx> wrote in message
>news:4ab4be9d.7552906@xxxxxxxxxxxxxxxx
>> Again, without technical details one can only speculate. but I think it
>> highly unlikely that the voltages involved will be anywhere near high
>> enough
>> to generate significant x-ray emissions.
>>
>> Here's an IBM blurb about x-rays from CRT type computer monitors that puts
>> it in perspective.
>>
>>     http://www.pc.ibm.com/ww/healthycomputing/vdt14.html
>>
>> But, your point about waiting for independent lab analysis is certainly
>> apropos as I'm sure the manufacturer is trying to show their light in the
>> best light.
>>
>> "D&SW" <d&sw@xxxxxxxxxxx> wrote:
>>
>>>Don't hold your breath. This is still smoke and mirrors. It is phospher
>>>based technology just like flourescent bulbs, but rather than using
>>>ultaviolet stimulation, they are using electron beam stimulation like an
>>>old
>>>television CRT. So the question is what is the next thing we have to worry
>>>about, X-ray emissions from our ESL bulbs?
>>>
>>>Tagging on the Dave Houston's train of thought, With regard to X10 the ESL
>>>probably will work in everything but the two wire wall switch, which
>>>relies
>>>on a trickle of power through the filament of an incandescent bulb. But
>>>I'll
>>>be waiting to see some independent lab analysis for secondary emissions. I
>>>have feeling this is the new version of the foot/shoe X-ray machine that
>>>every shoe store had back in the 40s and 50s until it was figured out they
>>>were a big cancer hazard.
>>>
>>>"unfrostedpoptart" <david@xxxxxxxxxxxxxx> wrote in message
>>>news:d8a1f691-bef0-4d34-9671-9e89e09234d4@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>>> I've just been reading about VU1's new ESL bulb technology (http://
>>>> www.vu1.com).  Looks really good and seems to address a lot of the
>>>> problems of CFL and LED. They specifically talk about (and show) that
>>>> it dims smoothly on normal dimmers.  I was wondering if anyone knows
>>>> how they would work with X10/Insteon/etc electronic dimmers and the
>>>> infamous local-control problems.
>>>>
>>>> I've given up on adding any more HA gear until there's a good,
>>>> inexpensive, high-efficiency, light bulb available that I can actually
>>>> dim!
>>>>
>>>> David
>>



comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home