[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: All zones showing fault (NX-8E), please help

Subject: Re: All zones showing fault (NX-8E), please help
From: Frank Olson <Use-the-email-links@xxxxxxxxxxxxxxxxxxxxxx>
Date: Mon, 14 May 2007 14:42:30 GMT
Newsgroups: comp.home.automation
References: <1179110732.495555.90240@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <BNS1i.181321$DE1.3481@pd7urf2no> <1179147689.843348.160670@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

NeonTide wrote:

>> It all depends on how you've connected your circuits.  If you haven't
>> used the supplied EOL resistors, then you have to program the panel for
>> "No EOL".
>
> Thank you very much for your help.  I found out where to turn off the
> EOL in the DP900 software.  Now everything works great!
>

You're most welcome.  Glad we could help.

References:
- All zones showing fault (NX-8E), please help
  - From: NeonTide
- Re: All zones showing fault (NX-8E), please help
  - From: Frank Olson
- Re: All zones showing fault (NX-8E), please help
  - From: NeonTide

Prev by Message: Re: X-10 AV switcher
Next by Message: Re: Serial IR receiver problem
Previous by thread: Re: All zones showing fault (NX-8E), please help
Next by thread: Re: All zones showing fault (NX-8E), please help
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home