Re: BSR X-10 Ultrasonic Command Console

[Charles Sullivan <cwsulliv@xxxxxxxxxxxx>]

On Thu, 12 Oct 2006 12:05:01 -0500, oldtimer wrote:

> Remember these? I'll bet a number of you do. I have just found one
> from my early days as an X-10 independent rep in the mid 80s. It still
> works but is gummed up from our wonderfully polluted New York air and
> what appears to be tape adhesive residue. I'd like to disassemble the
> case and clean it thoroughly before pressing it into service again.
>
> There is a hole on the underside of the case however it seems to be
> the underside of an internal post, in any case it is not a screw hole.
> I removed all four rubber feet thinking there might be screws under
> them and again, no luck. With the newer battery powered units I just
> remove the batteries and run them through the dishwasher as I do my
> mice and keyboards making certain they are completely dry before
> connecting again. This however plugs in to 110 power and I'm less
> inclined to try the same successful approach with it.
>
> Any advice on taking this puppy apart?
>
> Thanks.

Post your message on the X-10 Community Forum
<http://www.x10community.com/forums>

There are a couple of other "old timers" there who have admitted
owning these beasts.