[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Motorized blind retrofit

Subject: Re: Motorized blind retrofit
From: nobody@xxxxxxxxxxxx (Dave Houston)
Date: Sun, 28 May 2006 12:53:53 GMT
Newsgroups: comp.home.automation
References: <s9ydnUNYEJxw7-XZnZ2dnUVZ_sOdnZ2d@xxxxxxxxxxx> <447890fe.78207812@xxxxxxxxxxxxx> <BMGdne0n8KHSSuXZnZ2dnUVZ_tKdnZ2d@xxxxxxxxxxx> <rtadnWtQMo5ZnOTZRVn-pQ@xxxxxxx>

"Robert Green" <ROBERT_GREEN1963@xxxxxxxxx> wrote:

>Why don't you get power supplies to replace all the batteries and hot wire
>the IR control relays to work via a switches?   It wouldn't surprise me if
>you found board jumpers or even a connector for a hard-wired switch on the
>control unit. It's not unusual to have dual control options on motorized
>blinds.

Agreed. It certainly should cost less than $9000.

References:
- Motorized blind retrofit
  - From: Dave Horoschak
- Re: Motorized blind retrofit
  - From: Dave Houston
- Re: Motorized blind retrofit
  - From: Dave Horoschak
- Re: Motorized blind retrofit
  - From: Robert Green

Prev by Message: Re: Laying out a new house - looking for Wiring and controller advise
Next by Message: Re: First attempt at home automation
Previous by thread: Re: Motorized blind retrofit
Next by thread: Laying out a new house - looking for Wiring and controller advise
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home