[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: X10 signals can be TOO strong!

Subject: Re: X10 signals can be TOO strong!
From: nobody@xxxxxxxxxxxx (Dave Houston)
Date: Tue, 12 Dec 2006 16:17:32 GMT
Newsgroups: comp.home.automation
References: <xFhfh.471684$QZ1.157389@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> <zrSdneO1qLkKLeDYnZ2dnUVZ_qunnZ2d@xxxxxxx> <MlAfh.477761$QZ1.325019@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>

"Jeff Volp" <JeffVolp@xxxxxxx> wrote:

>As I recall, the Insteon problem was only reported
>on wall switches with heavy loads.

It has also been reported on non-Insteon dimmers - Lutron, Leviton and some
that were not named.

http://davehouston.net
http://tech.groups.yahoo.com/group/roZetta/
roZetta-subscribe@xxxxxxxxxxxxxxx

References:
- X10 signals can be TOO strong!
  - From: Jeff Volp
- Re: X10 signals can be TOO strong!
  - From: Robert Green
- Re: X10 signals can be TOO strong!
  - From: Jeff Volp

Prev by Message: Re: X10 signals can be TOO strong!
Next by Message: Re: Dedicated Z-wave sites?
Previous by thread: Re: X10 signals can be TOO strong!
Next by thread: Re: X10 signals can be TOO strong!
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home