Re: X10 dimmer modules and CF lamps

[Joerg <notthisjoergsch@xxxxxxxxxxxxxxxxxxxxx>]

Hello Bruce,

>
> Single-Pole (One Location) Switch (6291) Leviton ? Equipped with
> Intellisense (gated automatic gain control) and provides manual and
> remote ON/OFF control. Can be set to any of 256 DHC address codes to
> switch incandescent, inductive or resistive loads where dimming is not
> required. Responds to ON, OFF, ALL LIGHTS ON/ALL OFF commands. Wires
> easily into standard wall box using terminal screws. Neutral Connection
> Required. Pilot light is ON when switch is ON. Code wheels are located
> beneath rocker plate. Packed with Ivory and White Rocker and Frame. Kits
> for other colors must be purchased separately.
> Rated: 15A 120V AC 60Hz Incandescent, Inductive or Resistive.
>
> I have a case of these that I never used that are brand new in the box.
> These normally sell for about $28 but I'll sell what I have for $19 each
> delivered.
>

Thanks for the offer. I might take you up on it. With AGC they are
probably better in receiving codes than what we have now. But first I'll
have to buy a few CF flood lights to see if they can generate enough
lumens to light the areas where we play ping-pong in the evenings.
That's where most of our flood lights are.

For some reason the dimmer modules have always worked fine. The plug-in
units are the ones that sometimes miss a command.

--
Regards, Joerg

http://www.analogconsultants.com