Re: Help with PL513 X10 Connection to Lynx-R

[G. Morgan <alarmpro@xxxxxxxxxxx>]

On Sat, 26 Aug 2006 18:03:35 -0700, "Jack" <jack@xxxxxxxxxxxxx> wrote:

>"G. Morgan" <alarmpro@xxxxxxxxxxx> wrote in message
>news:cpm1f295u3153r7l0grrb6uc288i0n7soo@xxxxxxxxxx
>> On Sat, 26 Aug 2006 16:25:39 -0700, "Jack" <jack@xxxxxxxxxxxxx> wrote:
>>
>> >I have a Powerline PL513, which came with my Lynx-R panel and on the last
>> >page of the Installation and Setup Guide it shows three connections going
>to
>> >the Panel at connections 9, 13 and 14. The PL513 has four wires coming
>from
>> >it. The yellow goes to 13, Black to 14 and it shows red and green being
>> >joined and then connected to 9. I am not an electrician so I don't know
>what
>> >the symbol means when two wires join at a point and then one connection
>is
>> >made to the panel. Does this mean that I should connect the green OR red
>> >wire to terminal 9, or should I connect the red AND green wires to
>terminal
>> >9?
>> >
>> >
>>
>>
>> It means connect both.
>>
>
>George, first of all I appreciated your answere. Is there any documentation
>to validate what you have posted or is this based on your experience with
>this device? I know we're on the honor system here, but it's never wrong to
>verify information.
>


Who's George?