[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Help with PL513 X10 Connection to Lynx-R



"G. Morgan" <alarmpro@xxxxxxxxxxx> wrote in message
news:g7u1f2tp1ff5hb4i6ugtlqrvladmldegs9@xxxxxxxxxx
> On Sat, 26 Aug 2006 18:03:35 -0700, "Jack" <jack@xxxxxxxxxxxxx> wrote:
>
> >"G. Morgan" <alarmpro@xxxxxxxxxxx> wrote in message
> >news:cpm1f295u3153r7l0grrb6uc288i0n7soo@xxxxxxxxxx
> >> On Sat, 26 Aug 2006 16:25:39 -0700, "Jack" <jack@xxxxxxxxxxxxx> wrote:
> >>
> >> >I have a Powerline PL513, which came with my Lynx-R panel and on the
last
> >> >page of the Installation and Setup Guide it shows three connections
going
> >to
> >> >the Panel at connections 9, 13 and 14. The PL513 has four wires coming
> >from
> >> >it. The yellow goes to 13, Black to 14 and it shows red and green
being
> >> >joined and then connected to 9. I am not an electrician so I don't
know
> >what
> >> >the symbol means when two wires join at a point and then one
connection
> >is
> >> >made to the panel. Does this mean that I should connect the green OR
red
> >> >wire to terminal 9, or should I connect the red AND green wires to
> >terminal
> >> >9?
> >> >
> >> >
> >>
> >>
> >> It means connect both.
> >>
> >
> >George, first of all I appreciated your answere. Is there any
documentation
> >to validate what you have posted or is this based on your experience with
> >this device? I know we're on the honor system here, but it's never wrong
to
> >verify information.
> >
>
>
> Who's George?
>

You got me there G. Morgan. I don't know why I assumed your name is George.




comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home