[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Help with PL513 X10 Connection to Lynx-R

Subject: Re: Help with PL513 X10 Connection to Lynx-R
From: G. Morgan <alarmpro@xxxxxxxxxxx>
Date: Sat, 26 Aug 2006 23:37:33 GMT
Newsgroups: alt.security.alarms, comp.home.automation
References: <NemdnWunuuXoRW3ZnZ2dnUVZ_qSdnZ2d@xxxxxxxxxxxx>

On Sat, 26 Aug 2006 16:25:39 -0700, "Jack" <jack@xxxxxxxxxxxxx> wrote:

>I have a Powerline PL513, which came with my Lynx-R panel and on the last
>page of the Installation and Setup Guide it shows three connections going to
>the Panel at connections 9, 13 and 14. The PL513 has four wires coming from
>it. The yellow goes to 13, Black to 14 and it shows red and green being
>joined and then connected to 9. I am not an electrician so I don't know what
>the symbol means when two wires join at a point and then one connection is
>made to the panel. Does this mean that I should connect the green OR red
>wire to terminal 9, or should I connect the red AND green wires to terminal
>9?
>
>


It means connect both.

Follow-Ups:
- Re: Help with PL513 X10 Connection to Lynx-R
  - From: Jack

References:
- Help with PL513 X10 Connection to Lynx-R
  - From: Jack

Prev by Message: Re: Zigbee or Z-Wave based Wireless Smoke Alarms?
Next by Message: Zigbee or Z-Wave based Wireless Smoke Alarms?
Previous by thread: Help with PL513 X10 Connection to Lynx-R
Next by thread: Re: Help with PL513 X10 Connection to Lynx-R
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home