[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Home Intercom Retrofit

Subject: Re: Home Intercom Retrofit
From: "Robert L. Bass" <robertlbass@xxxxxxxxxxx>
Date: Tue, 17 May 2005 14:07:31 -0400
Newsgroups: alt.home.automation, comp.home.automation
References: <1116347832.692955.226850@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <O9GdnbqI7_4huRffRVn-tw@xxxxxxxxxxx> <LTpie.3138$tX5.379@xxxxxxxxxxxxxxxxxxxxxxxxxx>

> One answer might be, emphasis on the "might," is that some systems use
> 45ohm speakers and some
> use 4ohm speakers...

True, M&S does use 45-Ohm speakers.  45-Ohm "speaker only" stations from the
old system can be used with the new system.  However, anything with "talk" /
"listen" buttons will need to be replaced.  I spoke with M&S tech support
and they confirm this.

--

Regards,
Robert L Bass

=============================>
Bass Home Electronics
2291 Pine View Circle
Sarasota · Florida · 34231
877-722-8900 Sales & Tech Support
http://www.bassburglaralarms.com
=============================>

References:
- Home Intercom Retrofit
  - From: sgreenstein
- Re: Home Intercom Retrofit
  - From: Robert L. Bass
- Re: Home Intercom Retrofit
  - From: Art Todesco

Prev by Message: [no subject]
Next by Message: Re: Need some antenna advice (for my CM15A, of course)
Previous by thread: Re: Home Intercom Retrofit
Next by thread: Re: Some upcoming CQC 1.4 teasers
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home