[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: ACNC Doorbell FON Question
> ...How can I filter the DSL signal from the DoorBell Fon?
The Doorbell Fon connects between the incoming line and the house phones.
The connection is similar to a security system hookup, except that it
doesn't use the RJ31X jack. This presents a special problem for DSL since
the Doorbell Fon must be wired ahead of the internal phone lines. You could
use a standard alarm system DSL filter like this one (my website).
http://www.bassburglaralarms.com/product_8797_detailed.htm
You'll also need to wire in the RJ31X jack.
http://www.bassburglaralarms.com/product_3675_detailed.htm
The procedure isn't complicated but it's also not intuitive. I can sketch
out a diagram for you if you need it.
--
Regards,
Robert L Bass
=============================>
Bass Home Electronics
2291 Pine View Circle
Sarasota · Florida · 34231
877-722-8900 Sales & Tech Support
http://www.bassburglaralarms.com
=============================>
comp.home.automation Main Index |
comp.home.automation Thread Index |
comp.home.automation Home |
Archives Home