[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: X-10 commands via Harmony remote?



Well, the RF compatibility of the 890 certainly makes it optimal for HA
applications. If they do provide for some way to set it up with the IR543,
then maybe I'll take the plunge.

Thanks for your help.

Craig


"Dave Houston" <nobody@xxxxxxxxxxxx> wrote in message
news:4396c377.78731542@xxxxxxxxxxxxxxxx
> In the past they could only be programmed by downloading from their online
> database. Perhaps that has changed. I haven't paid much attention to it in
> the past few years.
>
> If you can find one, a refurbished Pronto TSU3000 (not color) costs less
> than $200. It's far more programmable.
>
> There's also software (Remote Control II) that runs on many Windows PDAs.
>
> "CeeDub" <craigmw@xxxxxxxxxxxxxxxxx> wrote:
>
>>Dave:
>>
>>A closer read of their website reveals that the 890 supports Z-WAVE. They
>>suggest that, in the future, they will also support other HA protocols.
>>But,
>>if you can get a remote to control X10 via an IR543, couldn't you just use
>>that remote to program the 890? It is, afterall, a learning remote. My
>>understanding is that you can use the learn function to capture the IR
>>signals coming out of a separate remote with the Harmony remotes for
>>devices
>>not supported on their website.
>>
>>In any event, this unit is pretty expensive and doesn't appear to even be
>>on
>>the market yet. They want $399 for the remote and $99 for the receiver.
>>That's a little step. There must be a cheaper but equally elegant way to
>>do
>>this!
>>
>>Thanks once again for your help.
>>
>>Craig
>>
>>"Dave Houston" <nobody@xxxxxxxxxxxx> wrote in message
>>news:4395d044.16679209@xxxxxxxxxxxxxxxx
>>> In particular I would ask Logitech what they mean by, "...for quick and
>>> easy
>>> command of home-entertainment equipment and household appliances that
>>> may
>>> be
>>> out of range for a traditional infrared remote."
>>>
>>> nobody@xxxxxxxxxxxx (Dave Houston) wrote:
>>>
>>>>Craig,
>>>>
>>>>Do you know what RF frequency the 890 uses?
>>>>
>>>>If Logitech has the X-10 IR codes in its library, you can use it with an
>>>>IR543. The IR543 is limited to a single housecode. I would investigate
>>>>this
>>>>before spending this much money on the remote.
>>>>
>>>>"CeeDub" <craigmw@xxxxxxxxxxxxxxxxx> wrote:
>>>>
>>>>>Dave:
>>>>>
>>>>>Thanks for the info.  You are correct. The 880 does not have RF, but
>>>>>the
>>>>>890
>>>>>does:
>>>>>
>>>>>http://www.logitech.com/index.cfm/products/detailsharmony/US/EN,CRID=2084,CONTENTID=10930
>>>>>
>>>>>So, I guess what I'd need for this is a single IR->Powerline converter,
>>>>>right? Then, I'd aim the IR output of the 890's RF receiver at the
>>>>>IR->powerline converter (and all of my audio/video gear) to be able to
>>>>>control my X10 stuff as well as my home entertainment center?
>>>>>
>>>>>Thanks again...
>>>>>
>>>>>Craig
>>>>>
>>>>>
>>>>>"Dave Houston" <nobody@xxxxxxxxxxxx> wrote in message
>>>>>news:43957318.207643262@xxxxxxxxxxxxxxxx
>>>>>> From the limited specs I can find on the web the 880 seems to be IR
>>>>>> only.
>>>>>> Even if it has RF, it won't work with North American X-10 unless it
>>>>>> uses
>>>>>> 310MHz and ASK modulation. And, the only way to program codes into
>>>>>> any
>>>>>> of
>>>>>> the Harmony remotes is by downloading them from Logitech.
>>>>>>
>>>>>> Insteon uses 902-924MHz with FSK modulation so unless a remote has
>>>>>> been
>>>>>> designed specifically for Insteon it's unlikely to support it.
>>>>>>
>>>>>> Most programmable remotes that have RF use 418MHz (N. America) or
>>>>>> 433.92MHz
>>>>>> (Europe) and ASK modulation.
>>>>>>
>>>>>> "CeeDub" <craigmw@xxxxxxxxxxxxxxxxx> wrote:
>>>>>>
>>>>>>>I'd like to get a Harmony remote to reduce "remote clutter." But, is
>>>>>>>there
>>>>>>>an economical way to control an RF receiver? I like the way you can
>>>>>>>use
>>>>>>>the
>>>>>>>6-in-1 RF/IR remote (though I've never used it as a universal
>>>>>>>remote).
>>>>>>>I
>>>>>>>know one of the Harmony remotes (the 880) has RF/IR functions. But, I
>>>>>>>don't
>>>>>>>know if it will interface with an X10-protocol receiver to convert
>>>>>>>the
>>>>>>>remote RF controls to powerline controls. Also, what about Insteon?
>>>>>>>
>>>>>>>Thanks much...
>>>>>>>
>>>>>>>Craig
>>>>>>>
>>>>>>
>>>>>
>>>
>>
>




comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home