[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Insteon Test Report

Subject: Re: Insteon Test Report
From: nobody@xxxxxxxxxxxx (Dave Houston)
Date: Thu, 29 Dec 2005 11:41:43 GMT
Newsgroups: comp.home.automation
References: <s6Jrf.6365$pE4.1675@xxxxxxxxxxxxxxxxxxxx> <C6Hsf.8311$ka.7161@xxxxxxxxxxxxxxxxxxxx> <1331741@xxxxxxxxxxxxxxxxxxx> <43b3c448.26960885@xxxxxxxxxxxxx>

nobody@xxxxxxxxxxxx (Dave Houston) wrote:

>ddl@danlan.*com (Dan Lanciani) wrote:
>
>>Could you repeat this test but substituting a standard X10 mini or maxi
>>controller with the DIM or BRI button wedged on for the Leviton signal
>>generator?
>
>I would also like to see it run with something that I'm sure is sending
>continuously with no significant gaps. Insteon only needs 5 powerline cycles
>+ 1 idle cycle for thr RF repeat. It might be slipping in during the 6 cycle
>X-10 gap between address and function.

That should read half-cycles for each instance of "cycles". The caffiene
hasn't kicked in yet.

References:
- Re: $20 Insteon dimmer switch
  - From: BruceR
- Re: Insteon Test Report
  - From: BruceR
- Re: Insteon Test Report
  - From: Dan Lanciani
- Re: Insteon Test Report
  - From: Dave Houston

Prev by Message: Re: $20 Insteon dimmer switch
Next by Message: Signal bridge question?
Previous by thread: Re: Insteon Test Report
Next by thread: Re: Insteon Test Report
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home