[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Insteon Test Report

Subject: Re: Insteon Test Report
From: nobody@xxxxxxxxxxxx (Dave Houston)
Date: Thu, 29 Dec 2005 11:19:57 GMT
Newsgroups: comp.home.automation
References: <s6Jrf.6365$pE4.1675@xxxxxxxxxxxxxxxxxxxx> <C6Hsf.8311$ka.7161@xxxxxxxxxxxxxxxxxxxx> <1331741@xxxxxxxxxxxxxxxxxxx>

ddl@danlan.*com (Dan Lanciani) wrote:

>Could you repeat this test but substituting a standard X10 mini or maxi
>controller with the DIM or BRI button wedged on for the Leviton signal
>generator?

I would also like to see it run with something that I'm sure is sending
continuously with no significant gaps. Insteon only needs 5 powerline cycles
+ 1 idle cycle for thr RF repeat. It might be slipping in during the 6 cycle
X-10 gap between address and function.

Follow-Ups:
- Re: Insteon Test Report
  - From: Dave Houston
- Re: Insteon Test Report
  - From: BruceR

References:
- Re: $20 Insteon dimmer switch
  - From: BruceR
- Re: Insteon Test Report
  - From: BruceR
- Re: Insteon Test Report
  - From: Dan Lanciani

Prev by Message: Re: speaker wire deteriorates?
Next by Message: Re: 2 100amp panel coupler help needed
Previous by thread: Re: Insteon Test Report
Next by thread: Re: Insteon Test Report
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home