Re: Levition Telephone Line Distribution Module Connections

["BruceR" <brNOSPAM@xxxxxxxxxx>]

All you need to terminate is the blue and white if that's what you want
to do. Follow the color code on the connectors. The pair goes to the two
center pins - 4 & 5.  Yes, you can combine the old wire and the new if
all you need is a loop system which is fine unless you're installing a
KSU and need homeruns to proprietary phones.

From:MGGuy
gdelozie@xxxxxxxxxxx

> Hi,
>
> Finishing up the rewiring of my house.  Done with cable, network, and
> speakers.  Now I need to hook up a single telephone line to a Levition
> Telephone Line Distribution Module.  Couple of questions.  I'm using
> Cat5e cable and plan on connecting just the blue and white wires to
> the demarc.  Leviton wants all of the Cat5 wires punched down.  Is
> this necessary?  If not what slots for the blue and white?
>
> Finally, I want to leave the old phone jacks active.  They appear to
> be home run back to the demarc because there are six telephone wires
> coming out of the house and connected to the demarc.  Can I just add
> the Cat5 with the phone cable at the demarc?  Is this gonna mess
> anything up?
>
> Thanks in advance.