[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Glass break sensors: FG1608 vs Shatterpoint 5620?

Subject: Re: Glass break sensors: FG1608 vs Shatterpoint 5620?
From: maxwell3e8@xxxxxxxxx
Date: Mon, 29 Jun 2015 22:30:17 -0700 (PDT)
Newsgroups: alt.security.alarms
References: <04d964f6-3bea-46d7-a502-bcebaff84650@xxxxxxxxxxxxxxxx>

Well, to get back to the original topic, I got a 5620 Shatterpoint sensor i=
nstalled. The shock sensitivity is quite poor. I have to wack the frame wit=
hin a few inches of the sensor, otherwise it doesn't respond to the shock. =
Not sure if I got somehow a defective unit off e-bay, but it appeared new.=
=20

The shock sensor is a little piezo sounder, which seems fine. There is no s=
ensitivity adjustment, as far I can tell it goes into a PIC microprocessor =
without any amplification.=20

If anyone has these units, how sensitive do they supposed to be to shock?=
=20

Follow-Ups:
- Re: Glass break sensors: FG1608 vs Shatterpoint 5620?
  - From: RTS
- Re: Glass break sensors: FG1608 vs Shatterpoint 5620?
  - From: John R. Sowden

References:
- Glass break sensors: FG1608 vs Shatterpoint 5620?
  - From: maxwell3e8

Prev by Message: Is MCM owned by ADI ???
Next by Message: Re: I'm on a search too!
Previous by thread: Re: Glass break sensors: FG1608 vs Shatterpoint 5620?
Next by thread: Re: Glass break sensors: FG1608 vs Shatterpoint 5620?
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home