[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Removing the NAPCO MA1000e System

Subject: Removing the NAPCO MA1000e System
From: Geoff Hummel <testking@xxxxxxxxx>
Date: Wed, 1 Apr 2015 16:19:19 -0700 (PDT)
Newsgroups: alt.security.alarms

I've purchased a home with the NAPCO MA1000e security system installed.  I've not subscribed to any monitoring service.

Earlier today I came home and the alarm went of - first time this has happened since we moved in 4 months ago.  I stop the alarm I flipped the fuse switch for the circuit the alarm system is wired to - that stopped the alarm.

So now I want to turn off the system, so I can then remove all the visible components: key-pads, motion detector and the control panel.

I'm concerned that if I start cutting wires or disconnect the battery backup in the control box all hell will rain down on me.

What's the best way to go about this?

Follow-Ups:
- Re: Removing the NAPCO MA1000e System
  - From: NickMark

Prev by Message: pc 1550 need to reset after disconnecting sensor and then connecting
Next by Message: Re: Digital Watchdog VMAXFLEX - (Why its discontinued)
Previous by thread: Firelite Firm ware upgrade suggested
Next by thread: Re: Removing the NAPCO MA1000e System
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home