[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Removing the NAPCO MA1000e System

Subject: Re: Removing the NAPCO MA1000e System
From: NickMark <nmarkowitz@xxxxxxxxx>
Date: Wed, 1 Apr 2015 16:59:17 -0700 (PDT)
Newsgroups: alt.security.alarms
References: <bcdf20b3-c9b1-4683-a488-d62510f4b0bf@xxxxxxxxxxxxxxxx>

On Wednesday, April 1, 2015 at 7:19:21 PM UTC-4, Geoff Hummel wrote:
> I've purchased a home with the NAPCO MA1000e security system installed.  I've not subscribed to any monitoring service.
>
> Earlier today I came home and the alarm went of - first time this has happened since we moved in 4 months ago.  I stop the alarm I flipped the fuse switch for the circuit the alarm system is wired to - that stopped the alarm.
>
> So now I want to turn off the system, so I can then remove all the visible components: key-pads, motion detector and the control panel.
>
> I'm concerned that if I start cutting wires or disconnect the battery backup in the control box all hell will rain down on me.
>
> What's the best way to go about this?

disconnect battery unplug the small power transformer will stop alarm from going off. unplug phone line do not cut or you may loose phone line

Follow-Ups:
- Re: Removing the NAPCO MA1000e System
  - From: Geoff Hummel

References:
- Removing the NAPCO MA1000e System
  - From: Geoff Hummel

Prev by Message: XP 1 trans ponders will the silence switches on the left lower disable speaker
Next by Message: Re: Digital Watchdog VMAXFLEX - (Why its discontinued)
Previous by thread: Removing the NAPCO MA1000e System
Next by thread: Re: Removing the NAPCO MA1000e System
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home