[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

pc 1550 need to reset after disconnecting sensor and then connecting

Subject: pc 1550 need to reset after disconnecting sensor and then connecting
From: jgoodjr <865b5cd0025b5446449bdb269b2b3602_5801@xxxxxxxxxxx>
Date: Sat, 25 Apr 2015 22:38:00 +0000
Newsgroups: alt.security.alarms

I disconnected a glass break sensor and then reconnected it, zone light stays
on, I need to reset system.


--
posted via
http://forums.cabling-design.com/security-physical/pc-1550-need-to-reset-after-disconnecting-sensor-and-then-co-64170-.htm
using  Cabling-Design's Web, RSS and Social Media Interface to
alt.security.alarms and other  telecom  groups

Follow-Ups:
- Re: pc 1550 need to reset after disconnecting sensor and then connecting
  - From: Jim Rojas

Prev by Message: Re: Edwards Fire Alarm
Next by Message: Removing the NAPCO MA1000e System
Previous by thread: Re: how do I do a factory reset on GE Caddx NX4 security system
Next by thread: Re: pc 1550 need to reset after disconnecting sensor and then connecting
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home