Re: GEMINI P3200 KEYPAD MESSAGE

[proguard <proguardsec@xxxxxxxxx>]

On 9 =D3=E5=F0=F4, 02:33, G. Morgan <sealte...@xxxxxxxxxxxxxxxxx> wrote:
> proguard...@xxxxxxxxx Wrote:
>
> >I get "enter your code to access area" at GEM-DXRP1 keypad connecting to=
 a Gemini P3200. Even master security code want work. Any idea?
> >Thank you!
>
> If you are trying to get into programming, is it KP #1 ? =A0Programming
> has to be done on that one.
>
> Master code wont disarm IIRC if that's what you're trying to do.
>
> If the system was working and you just came to service, power-cycle it
> first - that fixes everything on those POS panels. <g>
>
> What *are* you trying to do?

I made a cold start to the panel and after that i made doownload.
Everything was ok.
I was downloading the panel which was in disarm mode and after ending
download this message came up.
I took the panel on the bench in order to find out what happens.
The keypad is in address 01. Of course i power cycle it but after the
panel boot up this msg came up:
"Enter our code to access area" I used master security code, dealer
code, user code 1, user code 2, but still the same.
"Invalid access code, try again" It's the first time i saw this msg...