Re: DSC ESN Conversion

[mleuck <m.leuck@xxxxxxxxx>]

On Jan 25, 12:54=A0am, CH=AEIS <s...@xxxxx> wrote:
> "mleuck" wrote...
> > The spec sheet and installer guide says each receiver has to be the
> > same frequency and version, maximum 4 receivers. You can use 433 or
> > 900 but not both at the same time which I would guess most people want
>
> We have one in the office but I've never played with it or seen one
> installed. =A0Just a random part sitting on the shelf that came from our =
other
> office.
>
> It sounds to me like it'll either expand coverage or do 900/433. =A0Also,=
 the
> below link also mentions an 868 frequency... I've never heard of that one=
.
> I guess it could perform both functions if you have 900 Mhz devices at on=
e
> end of the building and 433 Mhz at the other end.
>
> In the installation instructions
> (http://cms.dsc.com/download.php?t=3D1&id=3D10092), look at installation =
step 6.
> There are two options: expanding coverage or multiplexing frequencies.
> Although with option B there are some strange restrictions for DLS.
>
> Perhaps there's a reason this part has never been heard of?
>
> - Chris

It appears that the v1.0 manual they list is for the Euro market since
868 is used there and that model can do dual frequency, both North
American manuals listed specifically state it can't and all receivers
have to be identical

Which is odd