Re: DSC ESN Conversion

[motley me <tommy@xxxxxxxxxxxxxxxxxxxxxx>]

mleuck <m.leuck@xxxxxxxxx> wrote in news:5d337cb7-00c8-4d16-9a63-
3052da1a3f4a@xxxxxxxxxxxxxxxxxxxxxxxxxxxx:

> On Jan 24, 6:06 am, "alarman" <nos...@xxxxxxxx> wrote:
>> mleuck wrote:
>>
>>  > You can't mix and match which is what I imagine most people would
>>
>> > want. The main advantage to the 5320 is expanding coverage
>>
>> Are you sure? The website says you can use 433 and 900 on the module.
>>
>> --
>> js
>>
>> Si Vis Pacem, Para Bellum
>
> The spec sheet and installer guide says each receiver has to be the
> same frequency and version, maximum 4 receivers. You can use 433 or
> 900 but not both at the same time which I would guess most people want

I had a rep tell me once that you could use both freq's with the 5320, but
it was a pain to program. you had to un-hook the 433 and program all the
900's then rewire the 433 and program all it's sensors. i have not had an
occsion to try this, but i was asking because i have a few older systems
out there with 900mhz sensors still on them.